| Structure | G+G |
|---|---|
| Touch controller | EETI / ILITEK |
| Surface hardness | 7H |
| Touch points | 10 Points |
| Brightness | 350, 1000cd/m2 – optional |
| Color | Black,White,Transparent,colors optional |
| Customized | AF/AR/AG/waterproof/glove touch |
| Operating system | Win7,win8,win10,Android, Linux,IOS |
| Warranty | 12 Months |
| Type | Capacitive |
| Transmittance | ≥85% |
| Video Input | VGA and DVI – optional |
| Application | Application |
| Structure | G+G |
|---|---|
| Touch controller | EETI / ILITEK |
| Surface hardness | 7H |
| Touch points | 10 Points |
| Brightness | 350, 1000cd/m2 – optional |
| Color | Black,White,Transparent,colors optional |
| Customized | AF/AR/AG/waterproof/glove touch |
| Operating system | Win7,win8,win10,Android, Linux,IOS |
| Warranty | 12 Months |
| Type | Capacitive |
| Transmittance | ≥85% |
| Video Input | VGA and DVI – optional |
| Application | Application |
This is a PCAP capacitive touch panel (cover lens + PCAP sensor, controller optional) engineered for OEM systems.
It is designed to be integrated with your LCD/module or enclosure for industrial HMI, kiosks, terminals, and custom equipment.
Get a Quote
Send OD/VA/AA + your bezel drawing for a fast engineering review.
A PCAP touch panel is typically used in two common ways:
If you are not sure whether you need a touch panel or a touch display module, send your target stack and we’ll recommend the fastest route.
Define OD/VA/AA, thickness, black border printing, and window layout to match your bezel and brand design.
Supports multi-touch gestures and stable edge performance when the final enclosure stress is controlled.
Most “ghost touch” issues appear after assembly. We prioritize grounding reference and routing guidance to reduce project risk.
For industrial or semi-outdoor use, behavior can be tuned (project-based) and validated with your real glove type and water film.
Related pages:
Touch Panel Overlay for Monitor
|
Industrial Custom Touch Panel Solutions
| Product Type | PCAP capacitive touch panel (cover lens + sensor; controller optional) |
| Size Range | 5″–75″ |
| Structure | G+G / G+F / G+FF |
| Touch Points | 10 / 20 |
| Touch Interface | USB / I2C |
| Cover Glass | thickness + strengthened/tempered |
| Surface | AG / AR / AF |
| Operating Temperature | -20~70°C / wide-temp |
Send Requirements
We reply with a recommended stack + risk-control notes for your enclosure.
| What to send | Example | Why it matters |
|---|---|---|
| Dimensions | OD/VA/AA + drawing | Fit, printing area, bonding feasibility |
| Environment | glove type, wet use, cleaning chemicals | Tuning + coatings selection |
| Integration | USB/I2C, cable routing, EMI sources | Field stability (ghost touch risk) |
| Glass & surface | thickness, AG/AR/AF | Impact, glare control, cleanability |
| Bonding preference | air gap / optical bonding | Reflection/contrast and reliability |
PCAP touch issues often appear after final assembly. We recommend a two-stage workflow:
(1) baseline bench test, then (2) re-test after mounting in the final enclosure.
No. This is a PCAP touch panel designed for OEM integration. If you need a finished unit with housing and I/O, choose a touch screen monitor.
Yes (project-based). Final validation should be performed with real gloves and water film in the final enclosure.
OD/VA/AA, interface (USB/I2C), cover glass thickness, environment requirements, and your front bezel drawing.
