APPLICATION SOLUTIONS
Industrial Touch
Screen Solutions
Configured for real
operating environments.
Build the right touch interface for your equipment. Compare PCAP touch panels, touch display modules, industrial monitors and panel PCs around your integration needs.
EverGlory supports OEM product selection, interface review and sample development, with optical, mechanical and environmental requirements assessed for the proposed configuration.
FROM REQUIREMENT
TO SAMPLE
Environment review
Stack-up proposal
Configured sample validation
01 / INDUSTRY SECTORS
Choose a Touch Solution for Your Industry
Compare the optical, mechanical, electrical and touch-input priorities for each application. Explore the industry pages for detailed options and validation requirements.
Industrial Automation & Factory HMI
For operator panels, CNC equipment and control cabinets: specify electrical noise, installation and operator inputs together.
- Noise & EMC Design: Select controller, grounding and shielding for specified IEC 61000 parts and levels; validate the agreed electrical configuration.
- Glove & Wet-Touch Tuning: Glove and wet-touch tuning are engineering options; test the specified glove thickness, contamination, water exposure and installed grounding.
- Mounting & Sealing Boundary: Define the front-panel or enclosure boundary. IP65/IP67 remain project targets until the specified assembly and installation are tested.
Outdoor Kiosks, EV Chargers & Signage
For unattended terminals exposed to sunlight, impact, temperature changes and moisture at the installed enclosure.
- Impact Protection Target: Define the IK10 target, cover-glass construction and mounting; verify the specified installed assembly before claiming compliance.
- Sunlight Readability: Select brightness, bonding and surface treatment with solar load, thermal design and power budget. Higher luminance targets require model review.
- Sealing & Wet-Touch Behavior: Separate the IP boundary from touch behavior. Test rain and water rejection with the selected controller, firmware, drainage and grounding.
Medical Equipment & Clinical Interfaces
For diagnostics, patient monitoring and clinical controls: assess cleaning, gloves and complete-device EMC separately.
- Surface & Cleaning Selection: Antimicrobial treatment is optional and separate from cleaning compatibility. Test the selected surface against the named disinfectant, concentration, contact time and cycle count.
- Glove & Saline Evaluation: Confirm glove and saline operation only after testing the intended glove, exposure, glass stack, controller, grounding and equipment.
- Medical EMC Boundary: Grounding, shielding and controller integration support design; final equipment manufacturers must validate the complete device against applicable IEC 60601-1-2 requirements.
Self-Service, Banking & Retail Terminals
For payment kiosks, vending machines, smart lockers and check-in terminals.
- Cover Glass & Cabinet Support: Select glass thickness, edge treatment and mounting for the impact target and cabinet opening.
- Privacy & Optical Options: Assess privacy film, coating and brightness together for their effects on viewing angle and image quality.
- Active-Pen Input: Evaluate the supported pen, controller, firmware and glass stack. Stylus input does not verify identity or legal validity.
Gaming, Casino & Amusement Machines
For slot machines, arcades and entertainment terminals requiring custom shapes and host integration.
- Custom Outlines & Cutouts: Review glass shape, apertures, border printing and mounting datum against the cabinet drawing.
- Curved Format Review: Review curved cover glass up to 55 inches; complete curved PCAP assemblies need confirmed bend radius, sensor and controller.
- Driver & Host Integration: Review 3M driver requirements, host software, controller, VID/PID and firmware before compatibility testing.
Marine & Aviation Systems
For bridge consoles, chart displays and cabin controls: specify glare, moisture, salt exposure, dimming and mounting.
- Optics & Dimming Inputs: Define reflections, brightness and minimum luminance. Night-navigation dimming stays an RFQ input pending verified model support and dimming curve.
- Salt-Mist Project Target: Define salt-mist exposure and assess the selected coating, enclosure, connectors and complete assembly against the agreed plan.
- Mechanical & Approval Boundary: Test vibration-resistant mounting and retained connectors to the required profile. No marine, aviation or navigation-equipment approval is implied.
Transportation, Rail & Fleet Terminals
For vehicle HMIs, passenger-information equipment and fleet terminals: assess reflections, temperature changes, vibration and vehicle electrical conditions.
- Optical & Thermal Targets: Select coatings, bonding and component ratings for cabin conditions and solar load; confirm the stack’s operating and storage limits.
- Vibration-Resistant Integration: Review strain relief, locking connectors and mounting; validate the assembly against the specified vibration profile.
- Power & Interface Confirmation: Verify model-specific voltage, transients and I/O. RS232/RS485 require supported configurations; 9–36V DC and CAN remain RFQ inputs pending model evidence.
02 / ENVIRONMENT MATRIX
How Operating Conditions Shape the Touch Stack-Up
Use the matrix to identify design inputs and the validation work that should be agreed before quotation and sample build.
Engineering selection reference. Final specifications and validation requirements depend on the selected product and installed equipment.
Scroll sideways to see all columns. Keyboard: use ← and →.
| Field Challenge | Engineering Selection | Validation Checkpoint | Primary Sectors |
|---|---|---|---|
| Direct Sunlight & High Glare | Brightness selection, optical bonding and AG/AR options assessed with the enclosure, solar load and power budget. | Measure the agreed configuration and review thermal behavior in the installed orientation. | Outdoor, Marine, Transportation |
| Gloves, Saline & Surface Water | Controller and firmware options selected for the named glove, liquid exposure, cover glass and grounding condition. | Test the configured sample with defined gloves, droplets or film and intended operator actions. | Medical, Industrial, Outdoor |
| Impact & Ingress Targets | Cover glass, frame support, gasket and enclosure boundary designed around the requested IK or IP target. | Verify the specified assembly and installation; front protection does not establish a whole-device rating. | Outdoor, Self-Service, Industrial |
| Electrical Noise & EMC | Controller, shielding, FPC routing and grounding reviewed against the equipment architecture. | Define applicable IEC 61000 parts or IEC 60601-1-2 requirements and validate the complete configuration. | Industrial, Medical, Marine |
| Cleaning & Surface Treatment | Antimicrobial treatment and chemical-cleaning compatibility handled as separate material selections. | Test the selected surface with named chemicals, concentrations, contact time and cycle count. | Medical, Industrial, Self-Service |
| Thermal, Vibration & Vehicle Power | Component ratings, bonding, retained connectors and regulated power selected from the stated operating conditions. | Validate actual temperature, vibration and voltage/transient profiles for the chosen model and mounting. | Transportation, Marine, Outdoor |
03 / HARDWARE INTEGRATION LEVELS
Choose Your Hardware Integration Level
Choose a PCAP panel when you already have the LCD and host electronics, or a touch display module when you need the LCD integrated. Choose a monitor for an external host, or a panel PC for integrated computing.
PCAP Touch Panels
Custom projected-capacitive sensors and cover-glass assemblies for teams integrating their own LCD and enclosure.
Touch Display Modules
Integrated PCAP and LCD assemblies with bonding, interface and mechanical options confirmed for the selected display.
Industrial Touch Monitors
Open-frame, panel-mount and VESA monitor options for connection to an external industrial computer or controller.
Industrial Panel PCs
All-in-one touch computing systems selected around I/O, operating system, installation and thermal requirements.
04 / APPLICATION ENGINEERING
Request Application Review
Start with screen size, the enclosure drawing, host interfaces and operating conditions. Use the review to define the product family, stack-up and sample test plan; agree acceptance criteria before sample approval.
Application RFQ Input Checklist
Include the details available at this stage:
- Product family and size: PCAP panel, touch display module, monitor or panel PC; diagonal size and active area.
- Installation: Open-frame, panel-mount, VESA or flush bezel; cover-glass and enclosure drawing in DXF, STEP or PDF.
- Operating conditions: Lighting, solar exposure, operating and storage temperature, moisture, cleaning agents, shock and vibration profile.
- Touch and electrical inputs: Finger, glove, stylus or liquid exposure; display signal, touch interface, supply range, transients and required I/O.
- Validation and supply: Applicable standards, acceptance criteria, prototype quantity, annual estimate and lifecycle requirement.
ENGINEERING REVIEW WORKFLOW
Engineering Review Workflow
- 01
Requirement & Drawing Review
Review the mechanical envelope, operating conditions, interfaces and applicable standards.
- 02
Stack-Up & Controller Proposal
Select cover glass, sensor architecture, bonding method and controller approach.
- 03
Drawing & Acceptance Review
Confirm the counter-drawing, interfaces and measurable acceptance criteria.
- 04
Sample Build & Tuning
Build the agreed sample and tune touch behavior for the specified inputs and environment.
- 05
Configured Sample Validation
Run the agreed functional, optical and environmental checks on the identified configuration.
- 06
Pilot & Controlled Production
Confirm the approved BOM revision, inspection records and change controls for repeat builds.
05 / START YOUR PROJECT
Configure the Touch Solution Around Your Equipment
Share your application, screen size, mechanical drawing, host interfaces and operating conditions.
The review can cover product-family fit, the mechanical stack-up, display and touch interfaces, available options and a sample validation plan. Include required standards and acceptance criteria where available.