| Size | 15 inch |
|---|---|
| Screen Diagonal | 4:3 |
| Structure | G+G |
| Touch controller | EETI / ILITEK |
| Surface hardness | >6H |
| Waterproof | IP65 |
| Sensor glass Thickness | 0.55mm±0.05mm |
| Cover lens Thickness | 2.0mm±0.2mm |
| Total Thickness | 2.75±0.2mm |
| Sensor Proces | Print Process(ITO Pattern) + laser line(Ag) |
| Resolution | 1920*1080, 1024 x 768, 4096*4096, 3840*2160, Other |
| Response Time | ＜25 ms |
| Tail Length | 100.71mm |
| Touch point | 10 points |
| Chamfer | R5 mm |
| Interface Type | USB,RS232,I2C |
| Warranty | 3 years |
| Size | 15 inch |
|---|---|
| Screen Diagonal | 4:3 |
| Structure | G+G |
| Touch controller | EETI / ILITEK |
| Surface hardness | >6H |
| Waterproof | IP65 |
| Sensor glass Thickness | 0.55mm±0.05mm |
| Cover lens Thickness | 2.0mm±0.2mm |
| Total Thickness | 2.75±0.2mm |
| Sensor Proces | Print Process(ITO Pattern) + laser line(Ag) |
| Resolution | 1920*1080, 1024 x 768, 4096*4096, 3840*2160, Other |
| Response Time | ＜25 ms |
| Tail Length | 100.71mm |
| Touch point | 10 points |
| Chamfer | R5 mm |
| Interface Type | USB,RS232,I2C |
| Warranty | 3 years |
This product is a 15 inch IP65 PCAP touch panel overlay designed to be integrated on top of an LCD/monitor or into a front bezel.
It focuses on field stability, front sealing strategy, and OEM-friendly integration for kiosks, terminals, and gaming-style interfaces.
Get a Quote
Send your LCD model + front bezel drawing for a fast fit & sealing review.
IP sealing is a system outcome (cover lens + gasket + bezel compression + assembly). We recommend gasket compression control and enclosure validation.
Designed for consistent touch behavior after mounting. Tuning can be aligned to your use case (project-based).
Optimized for OEM integration on displays where you need touch function without changing the whole monitor architecture.
Related: Touch Panel Overlay for Monitor
|
Waterproof Touch Screens
| Product Type | 15″ PCAP capacitive touch panel overlay |
| Touch Points | 10 / 20 |
| Interface | USB |
| Cover Glass | thickness + strengthened/tempered |
| Surface Treatment | AG / AR / AF |
| Front Sealing | IP65 (by bezel + gasket design) |
| Operating Temp | -20~70°C / wide-temp |
Send Your Parameters
LCD model + OD/VA/AA + bezel drawing = fastest confirmation.
Most touch issues happen after installation. Control torque and support points to keep edge response stable.
Ghost touch is commonly related to EMI and grounding reference changes. Re-test after final cable routing.
Bench baseline test first, then re-test after enclosure integration to prevent field failures.
QA references:
Touchscreen Test Checklist
|
Touchscreen Tester
No. This is a PCAP touch panel overlay for OEM integration. If you need a finished unit with housing and video I/O, choose a touch screen monitor.
Front IP65 is achieved by system design (glass + gasket + bezel + assembly). Final performance must be validated in the final enclosure.
Yes (project-based). Final validation should be performed with real gloves and water film on the final installed unit.
LCD model, OD/VA/AA, interface (USB/I2C), cover glass thickness, sealing target, and your front bezel drawing.
Standard packing with carton or wooden box
1.Our touch panel is safely sealed & packed with anti-static bag and foam wrapping.
2. Flexible packing options with carton or wooden box.
3. Shipping methods :DHL,UPS,FedEx,TNT,Air freight,LCL/FCL Sea freight.
